About Styrofoam Ceiling Tiles

Our Polystyrene (Styrofoam) ceiling tiles are one of the fastest and easiest ways to cover the popcorn ceilings and enhance any room’s decor. All you need to do is glue the ceiling tiles directly over the popcorn
The tiles have beveled edges for an easy butt joint installation. They could be left unpainted (tiles are white in color) or can be painted with a latex paint (after the installation).
If painted with flat ceiling paint the ceiling tiles will look just like plaster. Beside popcorn, Styrofoam ceiling tiles could be installed over pretty much any flat solid surface (plywood, drywall, concrete etc’).
These tiles cannot be installed in the t-bar grids ( can not be used as a suspended ceiling tile). It is also not recommended to use it on the walls ( as a wall panel ), because the material is pretty soft.
Each tile is 50cmX50cm or 19.6″X19.6″ which is 2.7 sq.ft. Pack of 8 tiles will cover ~21.5 sq.ft.

Installation Instructions>

  • Prepare the surface remove loose plaster, paint, wallpaper etc. and draw a chalk line in the middle of the room (preferably through light fixture electrical box, if you have one).
  • Apply the adhesive Ceramic wall tile paste adhesive is recommended (like Acryl Pro or Omni Grip).
  • Install the fist row along the chalk linemake it as straight as possible, join the tiles side by side.
  • Work your way to the sides first install all the whole tiles, then cut the tiles as necessary and install the cut pieces at the end.
  • If you decide to fill in the joints use paintable silicone to ensure that the ceiling will still remain paintable in future.

    • Product Features

    • Could be applied over almost any surface (even directly over popcorn ceilings)
    • Easy to install
    • Feather light
    • Water/moisture proof
    • Easy paintable (any good quality water based paint)