All Ceiling Tile By Us Inc Metal Ceiling Tiles products are made to order, and therefore, have a lead time of 10-20 business days.The tiles are a tenth of an inch or 0.0001. Specialty finishes or Custom Orders are unable to be returned or cancelled. There is a 15% cancellation fee on ALL cancelled orders, and a 25% restocking fee on returned items. Inspect all items upon receipt for damage and quantities; must report discrepancies within 7 days of receipt. NO returns will be accepted after 7 days. Please order at least 5% EXTRA for any possibility mistakes. Color Lots may vary. These Unfinished Tile 2×2 tiles from Ceiling Tiles By Us Inc are made Steel Plated Tin. This means made of steel & coated in tin. Unfinished Tin Plated Steel Ceiling Tiles Unfinished Tin Plated Steel Ceiling Tiles must be painted or finished. Any steel material should be coated with an oil-based product for protection and best results. If you choose to paint your metal ceiling, be sure you use an oil-based primer and paint as the steel will rust if a water based product is used. Unfinished steel must be cleaned with wax and grease cleaner before painting. Use care not to scratch pre-painted finishes when nailing up ceiling. Use care not to scratch pre-painted finishes when nailing up ceiling. Ordering samples before placing the full order is recommended, as colors/finishes displayed in marketing materials are intended for reference only and may vary from the actual finished product due to display settings and/or dye-lot subtleties. Some patterns may have minor dimpling and/or wrinkling inherent to our replication processes and/or manufacturing techniques. All lengths of cornice provide for 48″ of linear coverage, unless otherwise noted, and may need tweaking in the field to achieve the nominal dimensions portrayed.Tiles can withstand heat up to 300 degrees
- PLEASE READ DESCRIPTION BELOW!
- Tile 24″x 24″ Pattern 12″x12″ NAIL UP
- SIZED FOR ONE PERSON INSTALL
- No sharp edges.The tiles are a tenth of an inch or 0.0001.
- DIY PROJECT